Home > Perle > Perle Media Converters > Perle Stand-Alone Media Converters > Perle Unmanaged Media Converters > Perle Unmanaged Ethernet to Fiber (DIN Rail) > Perle Unmanaged 10/100TX to Fiber - SR-100 DIN Rail >

05091140

Perle 05091140
See any errors on this page?
Please let us know.
  
Perle SR-100-SC2D - Fast Ethernet Industrial Media Converter: 100Base-TX (RJ45) [100m/328ft] to 100Base-BX 1550nm TX / 1310nm RX single strand fiber, multimode (SC) [2 km/1.2 miles], DIN Rail, terminal block (Combicon) for ext pwr
MSRP: $448.00
ESP Price: $349.44
Contact us for Partner Pricing. (more info)


Free Shipping
Availability: Usually Ships in 24 Hours; However, Due To Shortages Contact Sales to Verify
Product Code: 05091140

Description Drivers & Downloads
 

Perle SR-100 DIN Rail Media Converters transparently connect UTP copper to fiber. These Fast Ethernet Media Converters provide an economical path to:

  • extend the distance of an existing network by linking CAT5/6/7 cabling to multimode or single mode fiber
  • extend the life of non-fiber based equipment by enabling data transmission from 100Base-TX devices over fiber
  • extend the distance between two copper-based devices or networks
  • protect Ethernet data from EMI noise and interference by inter-connecting your copper-Ethernet devices over fiber in industrial plants.

Some SR-100 Media Converters are also available with an SFP slot or support for -40C to +75C (-40F to +167F) extended operating temperatures.

Network Administrators can rest assured with Perle's advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Far End Fault, and Pause which make the end to end link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make SR-100 Fast Ethernet Media Converters the smart choice for IT professionals.

SR-100 Fiber Media Converter Features: 100Base-TX to 100Base-X

DIN Rail Enclosure Easily mount on a DIN rail or inside distribution boxes using native DIN Rail enclosure with grounding clip. No need for add-on brackets.
Auto-Negotiation The media converter supports auto negotiation on the fast ethernet 100Base-TX interface.
Auto-MDIX Auto-MDIX (automatic medium-dependant interface crossover) detects the signaling on the 100Base-TX interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection when enabled. With Auto-MDIX enabled, either a straight-through or crossover type cable can be used to connect the media converter to the device on the other end of the cable.
Link Pass-Through With Link Pass-Through the state of the 100Base-TX receiver is passed to the 100Base-X transmitter to make the media converter appear transparent to the end devices that are connected. In addition, if Far-End Fault is enabled the media converter can turn off the 100Base-TX transmitter when a FAR-End Fault is received.

Using Link Pass-Through with Far-End Fault minimizes data loss when a fault occurs. Should a fault occur, the end devices have the indication of a failure available to them making trouble shooting easier.
Far-End Fault (FEF) The media converter implements the 802.3 standard for Far-End Fault for the indication and detection of remote fault conditions on the 100Base-X fiber connection. With Far-End Fault enabled the media converter transmits the Far-End Fault Indication over the 100Base-X fiber connection whenever a receive failure is detected on the 100Base-X fiber connection. The media converter continuously monitors the100Base-X fiber connection for a valid signal.

The action the media converter takes on receiving a Far-End Fault Indication is dependent on the Link Pass Through switch setting.
Duplex Full and half duplex operation supported.
Pause (IEEE 802.3xy) Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The fast ethernet media converter supports pause negotiation on the 100Base-TX copper connection.
VLAN The media converter is transparent to VLAN tagged packets.
Remote LoopBack The media converter is capable of performing a loopback on the fiber port.
Features
  • 100Base-TX to 100Base-X Fiber Media Converters
  • Link copper to multimode or single mode fiber
  • Dual or Single fiber ST/SC connectors
  • Extend network distances up to 120km
  • Advanced Features: Link Pass-Through, Far-End Fault, Auto-MDIX
  • Triple Power Input: Dual Terminal block power connector & T-Bus


Browse for more products in the same category as this item:

Perle > Perle Media Converters > Perle Stand-Alone Media Converters > Perle Unmanaged Media Converters > Perle Unmanaged Ethernet to Fiber (DIN Rail) > Perle Unmanaged 10/100TX to Fiber - SR-100 DIN Rail

Product price is not filled in. This product cannot be purchased.



05050964 $1,628.64
NCX-0E05-ZTNA-R $350.00
05052910 $3,723.72
05062090 $2,174.64
PPC-615W-PTA $1,495.00
05090510 $855.66
PPC-618W-PTA $1,595.00
06004770 $996.84