Home > Perle > Perle Media Converters > Perle PSI-MOS Serial to Fiber Media Converters > Perle RS485 2-wire over Fiber Converters >

27085628

Perle 27085628
See any errors on this page?
Please let us know.
  
Perle PSI-MOS-RS485W2/FO 1300 E - Serial to Fiber Converter/Extender w/(1) RS485 2-wire terminal block & (1) duplex SC [1300nm], multimode [27km, 16.7 miles] / single mode [ 45km, 28 miles ] (Requires DC Power Supply)
MSRP: $3,017.30
ESP Price: $2,353.50
Contact us for Partner Pricing. (more info)


Free Shipping
Availability: Usually Ships in 24 Hours; However, Due To Shortages Contact Sales to Verify
Product Code: 27085628

Description Technical Specs Drivers & Downloads
 
The PSI-MOS-RS422/FO 1300 E Serial to Fiber Converter transparently connects 4-wire RS422/RS485 and INTERBUS devices to fiber optic cable. By transmitting serial data over optical fiber, these serial media converters provide an economical path to extend the reach of RS422 and RS485 devices.
Long Distance Serial Data Transmission over Fiber Using the FO 1300 E Serial to Fiber Converter you can extend your serial data transmission up to 27km (16.7 miles) over multimode fiber or 45km (28 miles) over single mode fiber. The result is that any two pieces of asynchronous serial equipment, located miles apart, can communicate at full duplex over fiber optic cable at rates up to 2 Mbps.
EMI, RFI and Transient Surge Immunity
Another advantage of the FO 1300 E fiber optic transmission system is the electrically isolated connection of devices. Electromagnetic interference (EMI) is a common phenomenon in typical environments like industrial plants, warehouses and factory floors. This interference can cause corruption of data over RS422 or copper-based Ethernet links. Data transmitted over fiber optic cable however is completely immune to this type of noise, thus preventing the negative effects of voltage equalization currents and electromagnetic interference on the data cables. A Serial to Fiber Media Converter therefore enables you to inter-connect your serial devices over fiber ensuring optimal data transmission, increased availability of the system, and improved network design flexibility for point-to-point connections and star structures. Flexible Fiber Optic Connections
The FO 1300 E operates at 1300 nm wavelength, using a separate LED emitter and photo-detector on SC type connectors. Almost any multimode or single mode glass fiber size can be used. Power Budget Considerations Calculating the power budget is critically important with planning the fiber optic link. The optical power budget is the amount of light required to transmit data successfully over distance through a fiber-optic connection. The amount of light energy available within the setup will dictate the length of the fiber optic cable run between serial media converters within the network. Optical power budgets are critical to help businesses avoid signal distortion. To learn how to calculate optical power budget read our technical note. Transmit and receive dBm can be found in the Hardware specifications.
Transmit each serial signal out over 10 fiber optic lines
 Up to ten (10) Serial to Fiber Converters can be grouped together using the TBUS DIN Rail bus system for voltage and data. This allows the serial converter to operate as a star coupler, taking the serial data input signal and distributing it to all Fiber optic output ports.
High Quality Features and Support
 The FO 1300 E are also equipped with comprehensive diagnostic functions to increase system availability, simplify start-up and permanently monitor the optical transmission quality. The integrated optical diagnostics allow permanent monitoring of the FO paths during installation and operation. The floating switch contact is activated when the signal level on the fiber optic paths reaches a critical level. This early alarm generation enables critical system states to be detected before they result in failure. These cost and time saving features, along with free worldwide technical support, make the FO 1300 E serial to fiber converter the smart choice for IT professionals.
  • Supply voltage routed through via DIN rail connectors
  • Connections can be plugged in using a COMBICON screw terminal block
  • Redundant power supply possible by means of optional system power supply unit
  • High-quality electrical isolation between all interfaces (INTERBUS, fiber optic ports, power supply, DIN rail connector)
  • Approved for use in zone 2
  • Floating switch contact for leading alarm generation in relation to critical fiber optic paths
  • Integrated optical diagnostics for continuous monitoring of fiber optic paths
  • Automatic data rate detection for all data rates up to 2 Mbps
Features
  • Extend serial data up to 28 miles
  • Immune to EMI, RFI and transient surges
  • Point-to-point or star configuration
  • SC type fiber connectors
  • Terminal Block for 4-wire RS422/RS485 Connections


Browse for more products in the same category as this item:

Perle > Perle Media Converters > Perle PSI-MOS Serial to Fiber Media Converters > Perle RS485 2-wire over Fiber Converters

Product price is not filled in. This product cannot be purchased.



05050544 $2,080.26
07016840 $2,488.98
TCF-142-S-ST $825.47
SNAP-Cu-12 $285.00
05082234 $3,871.92
ADAM-6066-D $284.00
05061060 $734.76
07016670 $2,463.24