Home > Perle > Perle PoE Injectors >

27030108

Perle 27030108
See any errors on this page?
Please let us know.
  
Perle INJ 1110-T DIN Rail PoE Injector with electrical isolation: 60 W Type 3 Hi-PoE compliant, (2) RJ45 sockets, 10/100/1000 Mbps, IP20 & potential separation (extended temperature)
MSRP: $940.50
ESP Price: $733.60
Contact us for Partner Pricing. (more info)


Free Shipping
Availability: Usually Ships in 24 Hours; However, Due To Shortages Contact Sales to Verify
Product Code: 27030108

Description Technical Specs Drivers & Downloads
 

INJ 1100-T PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-1100-T units are also protected against short circuits on the PoE side.

Generating up to 60 Watts, the INJ 1100-T provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power). Learn more about PoE.

With the INJ 1100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.

INJ 1000 PoE Injector Benefits

DIN Rail Enclosure

Easily mount on a DIN rail or inside distribution boxes using native DIN Rail enclosure with grounding clip. No need for add-on brackets.

Power Over Ethernet (PSE)

Performs the Power Sourcing Equipment ( PSE ) function on 1 UTP port for IEEE 802.3af (up to 15.4 watts PoE), IEEE 802.3at ( up to 30 watts PoE+ ) or IEEE802.3bt (up to 60 watts Hi-PoE) compliant devices.

Electrical isolation of the internal power supply unit

The supply voltage and Power over Ethernet port are electrically isolated. This provides optimum protection against short circuits in the data cables on the field side. The passive network isolator protects Ethernet devices from potential differences of up to 4 kV.


Short-circuit protection via electrical isolation

Potential Separation

Safe shield connection to ground potential

On-board PoE Power Controller

This PoE power controller provides compliant power provisioning and monitoring, properly sensing through signature detection whether or not the attach Ethernet devices are PoE capable or not. This provides a safe connection for both PoE and Non-PoE capable devices. Click here for more details

Advanced Power Management

  • PD signature detection
  • Current limiting protection
  • Over-Current Protection
  • PD power classification detection ( Class 0,1,2,3,4,5,6 )
  • Reverse polarity protection
Features
  • 10/100/1000 Mbps
  • Supply PSE power to PoE, PoE+ and Hi-PoE compliant devices
  • Provide 4 to 60 Watts of PoE power
  • IEEE 802.3af, IEEE802.3at and IEEE802.3bt compliant
  • Support for PoE PDs: Class 1 to 6 & Type 1, 2 and 3
  • Extended supply voltage range of 18 V DC ... 57 V DC, redundant
  • Safe shield connection to ground potential
  • Optional Extended temperature range of -40°C to +75°C
  • Electrical isolation of the internal power supply unit


Browse for more products in the same category as this item:

Perle > Perle PoE Injectors

Product price is not filled in. This product cannot be purchased.



05051630 $658.32
XB8-DMUS-002 $40.72
06005164 $970.32
05050154 $2,892.24
07016690 $1,763.58
04031814 $526.50
76002131 $14.50
MGate 5123 $893.72