Home > Perle > Perle PoE Injectors >

10040658

Perle 10040658
See any errors on this page?
Please let us know.
  
Perle INJ 2103-T DIN Rail PoE+ Injector with surge protection: 30 W PoE+ compliant, (1) RJ45 socket, (1) push-in terminal block, 10/100/1000 Mbps, IP20, potential separation, shield contacting with strain relief & shield current monitoring
MSRP: $922.90
ESP Price: $719.87
Contact us for Partner Pricing. (more info)


Free Shipping
Availability: Usually Ships in 24 Hours; However, Due To Shortages Contact Sales to Verify
Product Code: 10040658

Description Technical Specs Drivers & Downloads
 
INJ 2100-T PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. In environments vulnerable to voltage surges, it acts as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliantpower over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-2100-T units are protected against short circuits on the PoE side. The integrated surge protection increases system availability by protecting the connected end devices.

Generating up to 60 Watts, the INJ-2100-T provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power). Learn more about PoE.

With the INJ-2100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.
Features
  • 10/100/1000 Mbps
  • Supply PSE power to PoE, PoE+ and Hi-PoE compliant devices
  • Provide 4 to 60 Watts of PoE power
  • IEEE 802.3af, IEEE802.3at and IEEE802.3bt compliant
  • Support for PoE PDs: Class 1 to 6 & Type 1, 2 and 3
  • Extended supply voltage range of 18 V DC ... 57 V DC, redundant
  • Safe shield connection to ground potential
  • Extended temperature range of -40°C to +75°C
  • Electrical isolation of the internal power supply unit
  • Integrated surge protection to ensure high system availability
  • Wiring space covered with front panel cover


Browse for more products in the same category as this item:

Perle > Perle PoE Injectors

Product price is not filled in. This product cannot be purchased.



SNAP-Cu-12 $285.00
05083124 $5,439.72
07014030 $2,278.22
76000645 $30.00
PPC-415W-PD7A $2,705.00
05082024 $951.60
05080254 $741.00
XB8-DMUS-002 $40.72