Home > Digi > Digi Embedded Systems > Digi System-on-Modules > Digi RabbitCore® Series >

20-101-0434

Digi 20-101-0434
See any errors on this page?
Please let us know.
 
Digi RabbitCore RCM2100 System-On-Module (*MOQ May Apply)
ESP Price: $145.48
Contact us for Partner Pricing. (more info)
(Minimum order):  10



Availability: Usually Ships in 24 Hours; However, Due To Shortages Contact Sales to Verify
Product Code: 20-101-0434

Description Drivers & Downloads
 
The RCM2100 is a microprocessor core module designed to be the heart of your own controller built around the plug-in module. Data processing is done by a Rabbit 2000 microprocessor operating at 22.1 MHz.

The RCM2100 has a Rabbit 2000 microprocessor, a static RAM, up to two flash memory chips, two quartz crystals (main oscillator and timekeeping), and the circuitry necessary for reset and management of battery backup of the Rabbit 2000’s internal real-time clock and the static RAM. Two 40-pin headers bring out the Rabbit 2000 I/O bus, address lines, data lines, parallel ports, and serial ports.

The RCM2100 receives its +5 V power from the user board on which it is mounted. The RCM2100 can interface with all kinds of CMOS-compatible digital devices through the user board.

Features
  • Small size: 2.0" × 3.5" × 0.80" (51 mm × 89 mm × 20 mm)
  • Microprocessor: Rabbit 2000 running at 22.1 MHz
  • 34 CMOS-compatible parallel I/O lines grouped in five 8-bit ports (shared with serial ports)
  • 8 data lines (BD0–BD7)
  • 13 address lines (BA0–BA12)
  • I/0 read, write, buffer enable
  • Status, watchdog and clock outputs
  • Two startup mode inputs for booting and master/slave configuration
  • External reset input
  • Reset output
  • Five 8-bit timers, two 10-bit timers; five timers are cascadable in pairs
  • 2 × 256K flash memory, 512K SRAM
  • Real-time clock
  • Watchdog supervisor
  • Provision for customer-supplied backup battery via connections on header J2
  • Four CMOS-compatible serial ports: maximum asynchronous baud rate of 690,625 bps, maximum synchronous baud rate of 5.52 Mbps. Two ports are configurable as clocked ports.


Browse for more products in the same category as this item:

Digi > Digi Embedded Systems > Digi System-on-Modules > Digi RabbitCore® Series