Home > Korenix > Korenix Ethernet Switches > Korenix Layer 3 Ethernet Switches >

JETNET7850G-2XG-EU

Korenix JETNET7850G-2XG-EU
See any errors on this page?
Please let us know.
 
Korenix JetNet Industrial 48G+2 x 10G SFP Ports Gigabit Layer 3 Managed Ethernet Switch, EU plug
ESP Price: $5,794.00
Contact us for Partner Pricing. (more info)
Additional Information: This is an NCNR (non-canceable non-returnable) product



Availability: Usually Ships in 24 Hours; However, Due To Shortages Contact Sales to Verify
Product Code: JETNET7850G-2XG-EU

Description Technical Specs Drivers & Downloads
 
The JetNet 7850G-2XG is a 19-inch Gigabit Layer 3 Managed Switch, equipped with 48 10/100/1000 BaseTX ports including 2 x 1/10 GbE dual speed SFP+ ports delivering maximum throughput and flexibility for high-density and ultra high-speed connection. In addition to the 100-240VAC power-based JetNet 7850G-2XG model, Korenix provides the JetNet 7850G-2XG series, which support 48V power inputs and feature a design with -10~55o C wide operating temperature for severe industrial applications.
Triple Layer 3 Routing (IP, VLAN and Multicast routing)

The JetNet 7850G-2XG IP routing layer contains the IP forwarding layer, Address Resolution Protocol (ARP) mapping layer and Routing Tables. With IP forwarding table, the JetNet 7850G-2XG provides wire speed IP and VLAN inter-routing. A single JetNet 7850G-2XG allows users to configure multiple IP subnets and assign them to the physical interface. The routing table can be updated according to the routing information defined by configured static route or learnt by dynamic Routing Protocols.

The dynamic Routing Protocols supported by JetNet 7850G-2XG are RIPv1, v2, OSPFv1 and V2. Aiming to route multicast streams such as movies, videos, industrial automation streams through different subnets, in addition to IP and VLAN routing, thedynamic multicast routing protocols, such as PIM-DM and PIMSM, DVMRP , IGMP v1/v2/v3, are needed. Korenix JetNet 7850G-2XG outstands from other layer 3 switches by its multicast routing feature. With IGMP snooping and IGMP router port selection protocols, the JetNet 7850G-2XG acts as an access level switch or aggregated switch, so that the clients can be divided into different subnets for wire speed routing and for exchanging routing information with other L3 routers/ switches.
Features
JetNet 7850G-2XG Series Industrial 48G+2 x 10G SFP+Ports Gigabit Layer 3 Managed Ethernet Switch
  • 48-port 10/100/1000 BaseT with 2 x 1/10 GbE dual speed SFP+ ports (JetNet 7850G-2XG)
  • 48-port 10/100/1000 BaseT with 4 x 100/1000 SFP ports (JetNet 6852G)
  • Supports IP, VLAN & Multicast routing
  • IP Routing protocol supports RIP v1 / v2, OSPF v1/v2
  • Supports L3 Multicast, PIM-DM and PIM-SM, DVMRP, IGMP v1/v2/v3
  • Virtual Redundant Router Protocol (VRRP) for gateway redundancy
  • Supports LLDP and Korenix NMS for network auto-topology visualization and efficient group management
  • 802.1s Multiple Spanning Tree Protocol and 802.1w RSTP for network redundancy and MSR member mode
  • Supports 4k VLANs, GVRP/GMRP, protocol VLAN
  • 802.3ad LACP, up to 64 trunk groups, unicast and multicast load balance
  • Supports L2 / L3 / L4 ACL (access control list)
  • IEEE 802.1x Port-Based Authentication, RADIUS and TACACS client, SSH, SSL, TLS, Port binding
  • -10~55°C wide operating temperature


Browse for more products in the same category as this item:

Korenix > Korenix Ethernet Switches > Korenix Layer 3 Ethernet Switches