|
|
|
|
JetCon 2401 is a 1-port RS232/422/485 serial to fiber media converter
with extended fiber transmission. Single-mode and Multi-mode fiber
optic ports meet your needs for long distance transmission up to 40KM.
JetCon 2401 will automatically detect the data baud rate of the
connected full-duplex serial device, ranging from 300 to 921,600bps. By
moving up the DIP switch, JetCon 2401 supports an auto setting function
without system power reset to change serial interface, fiber wiring
architecture and termination of receiver and transmission line. Also
JetCon 2401 is specially designed for applications requiring good
immunity of EMI/EMS such as power substation, rail and traffic control
signification systems under severe electromagnetic interference and wide
temperature range.
JetCon 2401 can be easily wall mounted as well as be mounted directly on
DIN rail. AC 24V(12~32V) or DC 24V(12~48V) is available for different
operating environments. With IP 30 rigid aluminum case, CE/FCC
regulatory approvals, and 5-year global warranty, JetCon 2401 is your
reliable choice for hazardous applications.
Application
The JetCon 2401 supports two transmission configurations, Peer to
Peer in full duplex and Serial Fiber Ring (SFR) in half duplex. In a
Peer-to-Peer configuration, two fibers are required between the two
converters, one for data in each direction (RX and TX). To expand the
number of connected serial devices users can apply the SFP configuration
mode and connect the fiber transmitter to the rest of the slaves and
eventually back to the master node.
|
|
Peer to Peer Serial Communication (PTP) |
Serial Fiber Ring Communication (SFR) |
zxc Technology |
|
EIA/TIA-232 RS-232 (ITU-T v.28)
EIA/TIA-422 RS-422 (ITU-T v.11)
EIA/TIA-485 RS-485 (ISO/IEC8284) | |
|
RS-232 2-wires,RS-422 4-wire, RS-485 2/4-wire
| |
|
PTP mode: Peer To Peer wiring with full or half duplex mode
SFR mode: Serial Fiber Ring with half duplex mode | |
Interface |
|
1 x RS-232/RS-422/RS-485 serial port 1 x Fiber Transmit port, 1 x Fiber receive port | |
|
Serial port: 7-pin removable terminal block
Fiber port: 1 x Duplex ST
Power input: 3-pin removable terminal block with earth ground | |
|
|
|
RS-232: 50 feet RS-422: 4000 feet RS-485: 4000 feet Multi-mode fiber: 50/125um or 62.5/125um, max. distance 5KM Single-mode fiber: 8/125um, 9/125um max. distance 40KM | |
|
RS-232: TxD, RxD, Signal Ground. RS-422: TxD+, TxD-, RxD+, RxD-, Signal Ground RS-485 4 wires: TxD+, TxD-, RxD+, RxD-, Signal Ground. RS-485 2 wires: Data+, Data-, Signal Ground. | |
|
JetCon2401-m, Multi-mode: Distance:5KM @ 62.5/125um multi mode cable with 3dbm/km attenuation Wave-length: 820nm TX Power: -12dBm (Min) ~ -9dBm (Max) RX Sensitivity: -28dBm (Min) Link budget: 16dBm
JetCon2401-s, Single-mode: Distance: 40KM@9/125um single mode cable with 0.35dbm/km attenuation Wave-length:1310nm TX Power: -9dBm (Min) ~-8dBm (Max) RX Sensitivity: -27dBm (Min) Link budget: 18dBm | |
|
Switch 1 and 2: serial interface mode selection Switch 3: RX 120ohm terminator Disable (off)/Enable (on) Switch 4: TX 120ohm terminator Disable (off)/Enable (on) Switch 5: PTP mode (off) / SFR mode (on). | |
|
Power LED: Power 1 (Green) TX (Green): Serial port is on transmitting data. RX (Yellow): Serial port is on receiving data. Ring mode (Green): Working on SFR (Serial Fiber Ring) mode. | |
Power Requirements |
|
Positive or negative power system. DC 24V (12~48V) with reverse polarity protection. AC 24V (AC12~32V, 50/60Hz) Provides 0.65A over current protection | |
|
|
Mechanical |
|
DIN-Rail mount or desktop | |
|
IP-30 grade aluminum metal case | |
|
24.7mm(H) x 74mm (W) x 99mm (D) with DIN | |
|
0.24kg with package 0.135kg without package | |
Environmental |
|
-20 ~ 70°C
(JetCon 2401-mw/2401-sw -40~70°C) | |
|
5% ~ 95% (Non-condensing) | |
|
|
|
5% ~ 95% (Non-condensing) | |
Regulatory Approvals |
|
FCC Class B; CE/EN55022:2003,class B; CE/EN61000-3-2:2001 Harmonic Test CE/EN61000-3-3:1995 Flicker test | |
|
EN61000-4-2:1998, ESD Testing, Level 3
EN61000-4-3:1998, RS testing, Level 3
EN61000-4-4:1995, EFT testing, Level 3
EN61000-4-5:1995, Surge test, Level 3
EN61000-4-6:1996, CS testing, Level 3 | |
|
|
|
|
|
|
|
|
|
|
Dimensions (Unit –mm)
JetCon 2401-m Industrial Serial to Fiber Media Converter, ST, Multi-mode/5KM
Includes:
- JetCon 2401-m
- Quick Installation Guide
JetCon 2401-s Industrial Serial to Fiber Media Converter, ST, Single-mode/40KM
Includes:
- JetCon 2401-s
- Quick Installation Guide
|
|
|
|
|
|
|