|
|
|
|
The JetCard
5400-w is a RISC-based 3.5” single board
computer with Embedded Linux ready and advanced
layer-3 router functionality. For the better, the
JetCard 5400-w has one PCI-104 bus which can extend
up to 4 PCI-104 cards with different functions such as serial,
gigabit Ethernet, VGA, or CANbus…etc.
Therefore, the
JetCard 5400-w is an ideal development
platform for industry to apply in all kinds of control
applications.
PCI-104 stacking
The PCI-104 form factor supports the PCI bus. The
maximum configuration for the PCI bus of PC/104-
Plus modules is four plus the Host Board. |
|
Hardware Specifications
System |
|
Intel Xscale IXP435 400MHz RISC-based |
|
|
|
|
|
|
10/100 Based-Tx RJ-45 connector x5
|
|
|
USB 2.0 x1 (Host)
Supporting devices: USB flash, wireless dongle
|
|
|
3-pin header (RS-232 Interface)
|
|
|
LED per port (on the port):
Link/Activity (Green on/Green blinking)
Full Duplex/Collision (Yellow on/ Yellow blinking)
LED per unit:
Power on/off x1 (Green on/off)
Reset button x1
|
|
|
Generates a time-out system reset, 1 sec.
|
|
|
|
|
|
|
|
Mechanical |
|
|
|
|
Environment |
|
-40 ~ 176°F(-40 ~ 80°C), 5 to 95% RH
|
|
|
-40 ~ 176°F(-40 ~ 80°C), 5 to 95% RH
|
|
|
FCC class A, CE
EN55022 class A
EN55024
EN61000-3-2, 3
EN61000-4-2, 3, 4, 5, 6, 8, 11
IEC 60950
MTBF: at least 200,000 hours @25°C
|
|
|
|
|
|
Embedded Linux 2.6.20 |
|
|
|
ARP, PPP, CHAP, IPv4, IPv6, PAP, ICMP, TCP,
UDP, NFS, RIP, RIP-II, OSPF, ISIS, BGP, DVMRP, L2TP,
PPTP, SLIP, VLAN, IPsec, OpenVPN
|
|
|
busybox (telnetd, inetd, udhcp), e2fsprongs, i2c-tools, ltp-testsuite, microcom, mtd,
pciutils, usbmount,usbutils, bridge-utils, ethtool,
iptables, net-snmp, ntp, openssh, openssl,openVPN,
openSWAN, pppd, pptp-linux, proftpd, samba, smtpclient,
bind, l2tp, mrouted, quagga, wireless-tools, jamvm, syslogd,
udhcp, setserial, goahead web server
|
|
|
USB, Watchdog timer, UART, Ethernet |
|
Dimensions (Unit = mm)
JetCard 5400-w Linux-Ready Intel IXP435 400MHz 3.5” SBC with PCI-104 slot, -40~80℃
All items include:
- JetCard 5400-w x1
- Console cable x1
- Attached 2-pin power terminal block
- Quick installation guide
- Documentation and software CD-ROM
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
Linux-Ready Intel IXP435 400MHz 3.5” SBC with PCI-104 slot
- Intel IXP435 400MHz with Networking Processor
- 5 Ethernet ports: 1 WAN, 4 LAN
- 1 USB, 1 console port, 1 reset button
- 12~48V DC input
- -40~80℃ wide operating temperature
- Embedded Linux ready
- Router/ Ethernet switch function support
- Linux SDK provided
|
|
|
|
|
|
|