| Features | Software
Selectable EIA-232/422/485 interfaces Low Profile form factor on 1,4 and 8 port models Speeds up to 3.6Mbps on EIA-422/485 and up to 921.6 Kbps on EIA-232 Universal 3.3/5v PCI Bus slot support PCI 3.0 and backward compliant PCI-X compatible Compatible with 32 and 64 bit PCI slots Full modem control Hardware and software flow control Auto EIA-485 half duplex transmit control with selectable turnaround delay 25KV ESD surge protection across all ports 64 byte write and 64 byte read FIFOs |
| Connectors | |
| UltraPort1 SI-LP: | 1 on-board DB9M connector on low profile card
|
| UltraPort2 SI: | 2 on-board DB9M
|
| UltraPort4 SI-RJ45: | 4 on-board RJ45
|
| UltraPort4 SI-LP: | Single HD-68 connector on low profile card
|
| UltraPort8 SI-LP: | Single HD-68 connector on low profile card
|
| UltraPort16
SI:
|
Dual
HD-68 connectors HD-68 Connector Options include DB9, DB25 and RJ45 connector boxes and fan-out cables with Specialix International, Chase Research and Digi International standard pin-outs |
| EIA 422/485 Wiring Topology | |
| EIA-422: | 4-wire
Full Duplex (point-to-point) |
| EIA-485: | 4-wire
Full Duplex (multi-drop) 2-wire Half Duplex (multi-drop) 2-wire Full Duplex (point-to-point) |
| Signal Support: | TXD, RXD, RTS, CTS, DTR, DCD, DSR, RI,
|
| Approvals: | |
| Power Requirements: | |
| UltraPort1 SI-LP | +5V +/-5% 410mA -/+12V +/-5% 5mA |
| UltraPort2 SI | +5V +/-5% 410mA -/+12V +/-5% 10mA |
| UltraPort4 SI | +5V +/-5% 800mA -/+12V +/-5% 20mA |
| UltraPort8 SI | +5V +/-5% 1500mA -/+12V +/-5% 30mA |
| UltraPort16 SI | +5V +/-5% 3000mA +12V +/-5% 65mA |
| Dimensions: | |
| UltraPort1 SI-LP: | 56mm (H) x 120mm
(L) MDI PCI Standard |
| UltraPort2 SI: | 88mm (H) x 132mm
(L) |
| UltraPort4 SI-RJ45: | 88mm (H) x 132mm
(L) |
| UltraPort4 SI-LP: | 56mm (H) x 168mm
(L) MD2 PCI Standard |
| UltraPort8
SI-LP: |
56mm (H) x 168mm (L) MD2 PCI Standard |
| UltraPort16 SI: | 98.5mm
(H) x 188mm (L) |