Solve most any Modbus conversion challenge with the MESR Modbus Gateway
MESR Modbus Gateways bridge devices on Modbus serial networks (RS-232, RS-422 or RS-485) with those on Modbus TCP networks, allowing seamless integration of any Modbus device. Each serial port is accessible over a LAN or WAN by up to 16 simultaneous Modbus TCP masters. All Vlinx™ MESR gateways feature auto detecting 10/100Base T copper and fiber optic connections.
Simple Installation and Setup
Ethernet Master Serial Slaves
MESR9xx modules can be used to integrate serial slave devices on a
MODBUS TCP network. This allows TCP Masters to control serial slave
Vlinx™ MESR Configuration Screens for this Application
Serial & Ethernet Masters, Serial & Ethernet Slaves
MESR9xx modules can also integrate multiple master devices onto serial and Ethernet networks.
Two Identical Hard Coded Slaves
In this scenario, two slave devices that are hard coded with the same ID
are required. This is accomplished by placing them on different serial
Serial Masters with IP Slaves
Serial Masters can be used to control IP slaves
In this scenario, identical or backup production lines can be controlled
by the same IP Master. This allows the duplicate networks to be
configured identically, saving documentation and maintenance time.
Download Firmware Upgrade Procedure