 |
The AWK-5222 dual-RF wireless AP/Bridge/Client provides a flexible and highly reliable solution for your industrial wireless networks. The AWK-5222 is rated to operate at temperatures ranging from 0 to 60°C for standard models and -40 to 75°C for extended temperature models, and it is built rugged enough for industrial applications. With two independent RF modules, the AWK-5222 supports a greater variety of wireless configurations and applications, and the redundant wireless connections increase the reliability of the entire wireless network. The AWK-5222’s two DC power inputs make the power supply more reliable, and it can also be powered via PoE for easier deployment.
Redundancy to Increase System Reliability
• Dual DC power inputs and PoE
• Redundant dual-RF design for rapid fail-over
• Immunity against disconnection caused by radio interference
• Loading balance of wireless communication
Advanced Security
• 64-bit and 128-bit WEP (Wired Equivalent Privacy)
• Enable/disable SSID broadcasts
• Power filters for access control
• IEEE 802.1X/RADIUS supported
• WPA/WPA2/802.11i supported
| • WLAN Interface |
| Standards |
IEEE 802.11a/b/g for
Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for
10BaseT(X)
IEEE 802.3u for 100BaseT(X)
IEEE 802.3af for
Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for
Rapid STP
IEEE 802.1Q for VLAN |
| Spread
Spectrum and Modulation (typical) |
• DSSS with DBPSK,
DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
64QAM @ 54 Mbps, 16QAM @
24/36 Mbps, QPSK @ 12/18 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBSK@ 1
Mbps
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
•
802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @
9/6 Mbps |
| Operating
Channels (central frequency) |
US:
2.412 to 2.462
GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472
GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz
(13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24
GHz (4 channels for W52) |
| Security |
• SSID broadcast
enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
•
64-bit and 128-bit WEP encryption, WPA /WPA2 Personal and Enterprise (IEEE
802.1X/RADIUS, TKIP and AES) |
| Transmission
Rates |
802.11b: 1, 2, 5.5,
11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| TX
Transmit Power |
802.11b:
Typ.
23±1.5 dBm @ 1 to 11 Mbps
802.11g:
Typ. 20±1.5 dBm @ 6 to 24 Mbps, Typ.
19±1.5 dBm @ 36 Mbps, Typ. 18±1.5 dBm @ 48 Mbps, Typ. 17±1.5 dBm @ 54
Mbps
802.11a:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48
Mbps, Typ. 15±1.5 dBm @ 54 Mbps |
| RX
Sensitivity |
802.11b:
-97 dBm @
1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90 dBm @ 11
Mbps
802.11g:
-93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 12 Mbps, -88
dBm @ 18 Mbps, -84 dBm @ 24 Mbps, -80 dBm @ 36 Mbps, -76 dBm @ 48 Mbps, -74 dBm
@ 54 Mbps
802.11a:
-90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 12 Mbps,
-85 dBm @ 18 Mbps, -83 dBm @ 24 Mbps, -79 dBm @ 36 Mbps, -75 dBm @ 48 Mbps, -74
dBm @ 54 Mbps |
| • Protocol Support |
| General
Protocols |
Proxy ARP, DNS, HTTP,
HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP |
| AP-only
Protocols |
ARP, BOOTP, DHCP,
STP/RSTP (IEEE 802.1D/w) |
| • Interface |
| Default
Antennas* |
2 dual-band
omni-directional antennas, 2 dBi, RP-SMA (male)
*Only available with the AWK-5222 model |
| Connector
for External Antennas |
AWK-5222: RP-SMA
(female)
AWK-5222-M12: QMA (female) |
| RJ45
Ports |
2, 10/100BaseT(X),
auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection (AWK-5222
only) |
| M12
Ports |
2, 10/100BaseT(X) auto
negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection (AWK-5222-M12
only) |
| Console
Port |
RS-232
(RJ45-type) |
| LED
Indicators |
PWR1, PWR2, PoE,
FAULT, STATE, WLAN1, WLAN2, 10M, 100M (TP port), LAN1, LAN2 (M12 port) |
| Alarm
Contact (digital output) |
1 relay output with
current carrying capacity of 1 A @ 24 VDC |
| Digital
Inputs |
2 electrically
isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state
“0”
• Max. input current: 8 mA |
| • Physical
Characteristics |
| Housing |
Metal, IP30
protection |
| Weight |
1.1 kg |
| Dimensions |
62 x 135 x 105 mm
(2.44 x 5.31 x 4.13 in) |
| Installation |
DIN-Rail mounting
(standard), Wall mounting (optional) |
| • Environmental
Limits |
| Operating
Temperature |
Standard Models: -25
to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to
167°F) |
| Storage
Temperature |
-40 to 85°C (-40 to
185°F) |
| Ambient
Relative Humidity |
5% to 95%
(non-condensing) |
| • Power Requirements |
| Input
Voltage |
12 to 48 VDC,
redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af
compliant)
*Compliant with EN 50155 on 24
VDC |
| Connector |
10-pin removable
terminal block |
| Power
Consumption |
12 to 48 VDC, 800 mA
(max.) |
| Reverse
Polarity Protection |
Present |
| • Standards and
Certifications |
| Safety |
UL 60950-1, EN
60950-1 |
| EMC |
EN 301 489-1/17, FCC
Part 15 Subpart B, EN 55022/55024,
IEC 61000-6-2/4 |
| Radio |
EN 300 328, EN 301
893 |
| Rail
Traffic |
EN 50155, EN
50121-1/4 |
| • Reliability |
| MTBF
(mean time between failures) |
AWK-5222: 291,367
hrs |
| • Warranty |
| Warranty
Period |
5 years |
Dimensions
|
|
|
